The CBD Expert publishes complete third-party Certificates of Analysis, CBD lab results, for every product batch, tested by ISO-accredited Infinite Chemical Analysis Labs in San Diego, California. Our Precision Botanical Mist spray tested at Total THC: 0.000mg—Not Detected—making it fully compliant under Section 781 federal hemp regulations effective November 12, 2026. Our Whole Flower Botanical Fluid demonstrates the complete full-spectrum cannabinoid profile including CBD, CBG, CBC, and naturally occurring terpenes that produce the entourage effect.
At The CBD Expert, we believe you have the right to know exactly what’s in the product you’re using. Every batch is independently tested for potency and purity and we publish the full results here. A COA—Certificate of Analysis—is the document that shows you the CBD lab results for each batch: cannabinoid potency, THC levels, and safety testing for pesticides, heavy metals and residual solvents.
Our testing is conducted by PhD chemists at Infinite Chemical Analysis Labs, an ISO/IEC 17025:2017 accredited, PJLA accredited, state-licensed laboratory in San Diego, California. With our products, two COAs together tell a story that neither can tell alone—the spray proves compliance, the fluid proves the formula. Here’s what you’re looking at and why both matter.
The Spray: Precision Botanical Mist COA, CBD Lab Results
Current Batch—Total THC Not Detected—Fully Compliant November 2026
This is the current COA for our Precision Botanical Mist. It confirms zero detectable THC across every analyte tested—Delta-8, Delta-9, THCA, THCV, all Not Detected. This is the product that will remain fully available after federal regulations take effect November 12, 2026 under Section 781. To understand why the same whole-flower formula registers zero detectable THC in the spray, read the section below.
- Product: Precision Botanical Mist (Whole Flower Botanical Mist)
- Sample ID: ICC-260608-44-001
- Testing Laboratory: Infinite Chemical Analysis Labs, San Diego CA (DCC License #C8-0000047-LIC, ISO/IEC 17025:2017 Accredited #CA-RA-L25-226-1, PJLA Accreditation #95560)
- Date Produced: June 11, 2026
- ✅ Overall Batch Result: PASS
Cannabinoid Profile
- Total CBD: 73.4 mg per package / 4.94 mg/ml
- Total THC: 0.000 mg — Not Detected
- Total Cannabinoids: 73.4 mg per package
Safety & Purity
- ✅ Residual Solvents: PASS
- ✅ Heavy Metals: PASS
- ✅ Pesticides: PASS
View the Full Report—Whole Flower Botanical Mist CBD Lab Results
Download Full Certificate of Analysis — Batch ICC-260608-44-001 (PDF)
From Fluid to Mist: Same Formula, Same Process, Zero Detectable THC
This is where the story gets important.
Our spray and our fluid are the same whole-flower cold-process formula—same plant, same extraction, same molecular integrity. To create the Precision Botanical Mist, the fluid is processed further—the thick water-soluble concentrate is reduced to a fine mist through particle size reduction. This process doesn’t add anything or remove anything.
What it does is restructure the molecules at a size so small that THC—already present only in trace amounts in the fluid—falls below the threshold of laboratory detection entirely.
Not Detected doesn’t mean it was stripped out. It means the molecular restructuring during processing renders it undetectable.
The result is the same entourage effect, the same up to 90% bioavailability, the same whole-flower synergy—in a format that registers zero detectable THC under any laboratory test, including the strict Total THC calculation required under Section 781 taking effect November 12, 2026.
The spray proves the formula is compliant. The fluid below proves the formula is full spectrum. They are the same product at different stages of the same process.
The Formula: Whole Flower Botanical Fluid COA
Proof of Full-Spectrum Whole-Flower Content
This is the COA for our Whole Flower Botanical Fluid—the cold-process whole-flower extract that forms the foundation of both products. It shows the complete cannabinoid profile exactly as it exists in the raw formula: CBD, THC, CBG, CBC, terpenes and flavonoids all present as nature intended. This is the proof that our formula is genuinely full-spectrum whole-flower—not an isolate, not a broad-spectrum extract with compounds removed, but the complete plant profile preserved through cold-process extraction.
- Product Tested: Whole Flower Fluid
- Date of Test: April 7, 2025
- Testing Laboratory: Infinite Chemical Analysis Labs, San Diego CA (License #CA-RA-L25-226-1, ISO/IEC 17025:2017)
- ✅ Overall Batch Result: PASS
Cannabinoid Profile
This section shows the potency of the active cannabinoids. This batch contains 33 mg of Total CBD per gram and 0.85 mg of Total THC per gram. Each 10ml bottle contains approximately 330 mg of Total CBD and 8.5 mg of Total THC, based on this concentration. (The lab’s tested sample for this COA was 5.85g, smaller than a full bottle, so per-gram concentration—not the COA’s raw per-package total—is what scales accurately to retail bottle size.)
- Total CBD: 33 mg/g
- Total THC: 0.85 mg/g
- CBG: 0.71 mg/g
- CBC: 0.64 mg/g
- Total Cannabinoids: 36 mg/g
| Cannabinoid | Potency (% by weight) | Potency (mg/g) |
| Total CBD | 3.27% | 33 mg/g |
| Total THC | 0.0851% | 0.85 mg/g |
| CBD | 3.00% | 30 mg/g |
| CBG | 0.0714% | 0.71 mg/g |
| CBC | 0.0640% | 0.64 mg/g |
| Total Cannabinoids | 3.60% | 36 mg/g |
Dominant Terpene Profile
Terpenes are the aromatic compounds that contribute to the plant’s unique scent and potential effects. They contribute to the entourage effect—the synergistic interaction between cannabinoids and plant compounds that whole-flower formulas preserve and isolates cannot replicate.
- α-Pinene: 0.184 mg/g
- β-Myrcene: 0.233 mg/g
Safety & Purity
- ✅ Pesticides: PASS
- ✅ Heavy Metals: PASS
- ✅ Residual Solvents: PASS
View the Full Report—Whole Flower Fluid CBD Lab Results
Download Full Certificate of Analysis — Whole Flower Fluid (PDF)
Transparency Disclaimer: Botanical Extract vs. Isolated Cannabinoids
In alignment with our commitment to clarity, please note that these products are 10,000 mg and 1,200 mg Whole Flower Hemp Extract. This refers to the total weight of the raw botanical extract used in the formulation to maintain Cold Process Molecular Integrity. The CBD lab results (COA) above reflect the concentration of specific active cannabinoids, such as CBD, which exist as a natural fraction of that total whole-flower profile. We do not use isolates; our goal is the complete botanical synergy of the plant.
Products You Can Trust
We publish our full lab results because we believe you deserve to know exactly what you’re taking. If you have questions about our testing, our formula, or what any of these results mean for you, contact us directly—Robyn personally responds.
Frequently Asked Questions about The CBD Expert COA Lab Results
The 10,000mg and 1,200mg figures on our labels describe the total whole flower hemp extract, not CBD content alone. Whole flower extract contains CBD plus the full range of other cannabinoids and terpenes that make up the entourage effect, so CBD is only one part of that total weight. Our COAs report CBD content separately: 33mg per gram for the Whole Flower Botanical Fluid, and 73.4mg total CBD per package for the Precision Botanical Mist. We list both numbers side by side because we’d rather you see the actual lab data than rely on the label alone.
Our COA is a lab-verified fact: Total THC, CBD content, and screening for heavy metals, pesticides, and residual solvents are all tested by an ISO/IEC 17025-accredited third-party lab, Infinite Chemical Analysis Labs. That’s independently confirmed data. Claims about bioavailability, the entourage effect, or how our extraction process affects THC detectability are our own formulation insights, based on the process and testing we’ve done, not something the COA itself certifies. We think it’s worth being clear about that difference so you know exactly what’s lab-verified and what’s our own explanation.
Oil-based CBD relies on the digestive system to break down fat-soluble compounds before they enter the bloodstream, which typically results in 6 to 19% bioavailability. Our formula is naturally water-soluble through cold-process extraction, without emulsifiers or nano-processing, allowing sublingual absorption directly through the tissue under the tongue. This route supports bioavailability up to 90%, since it bypasses the digestive first-pass effect entirely. Full lab results for both products are available on this page.